Power cord:
Lite series and professional miners will come with a power cord as well as the PSU.
The power cord we send you has a type i plug and IEC C19 power connector.
If the power cord provided with the miner doesn't match your local socket, you can opt to purchase an adapter or a power cord that meets the specifications (C19 connector;16A/250V 2.5mm²).
- 16A indicates a current carrying capacity of 16 Amperes, capable of handling a maximum current of 16 Amperes.
- 250V indicates a voltage rating of 250 Volts, suitable for environments with a maximum voltage of 250 Volts.
- 2.5mm² indicates a wire cross-sectional area of 2.5 square millimeters, indicating the wire's conductivity and load-bearing capacity.
Please note: Using a different power cord may impact troubleshooting any potential issues later on.
Adapter:
You can check the picture below and find out what types of plug adapter you need to get.
Transformer/Voltage converter
- Click here to check the voltage information worldwide.
- Click here to look up the voltage range of the miners.
- If local voltage doesn't meet the input voltage standard of the miner, you’ll need to pair it with a voltage converter or transformer.
Comments
0 comments
Article is closed for comments.