Upgrade Miner Firmware

Upgrade via IP address

1. Unlock your miner.

2. Visit the [System] page, select and upload the new firmware file into the upgrade firmware path, click the [Update] button, and the miner will start the firmware upgrade automatically.

Upgrade via Goldshell HUB

1.To upgrade your Goldshell miner, navigate to hub.goldshell.com and access the MINER page within the HUB. Locate and click the yellow upgrade button. The upgrade process will take approximately 3 to 5 minutes to complete.

Upgrade via Goldshell Zone

To upgrade your miner, open the Zone APP and go to the device page. Select the miner you wish to upgrade, then click “Management”, tap "update". The upgrade process will take approximately 3 to 5 minutes to complete.

NOTES:

Following the completion of the upgrade, the pool and network settings will be preserved；

If the firmware hasn't changed, try refreshing the page.

You can download the latest firmware from Github webpage:

https://github.com/goldshellminer/firmware

*(If you cannot find a firmware version newer than your current one on GitHub, or if there is no firmware available for your specific miner type, it means that the firmware for that particular type has not been updated yet. For firmware updates, we recommend following our Firmware Update – goldshellminer on Goldshell help center, Twitter and Discord channels for the latest information and announcements.)

The old version of Firmware is in archive file:

https://github.com/goldshellminer/firmware/tree/master/archive

The firmware upgrade is expected to take 5 minutes. Please ensure that your network connection remains stable and do not power off your device during the upgrade process;

If you do not experience any issues, you may continue using the previous firmware version.