Guidelines for HNS&SC and KDA&SC Switching

HNS&SC switching:

Only available for HSBOX, HSLITE, HS3SE, HS5, HS6, HS3, HS6SE, HSBOX Ⅱ.

Steps:

1. Enter the dashboard of the miner.

2. Upgrade to the latest firmware. Upgrade Miner Firmware

Warning! Do not turn off the power or operate the miner during the upgrade process. Please wait for 5-10 minutes, and then press the IP button to report the miner's IP. Upon successful access to the dashboard, the upgrade process shall be considered as complete.

3. Switch the algorithm, select the corresponding algorithm and apply it, and add the corresponding mining pool.(As illustrated in the succeeding figure)

KDA&SC Switching

Only available for KD5PRO.

1. Enter the dashboard of the miner.

2. Upgrade to the latest firmware. Upgrade Miner Firmware

Warning! Do not turn off the power or operate the miner during the upgrade process. Please wait for 5-10 minutes, and then press the IP button to report the miner's IP. Upon successful access to the dashboard, the upgrade process shall be considered as complete.

3. Switch the algorithm, select the corresponding algorithm and apply it, and add the corresponding mining pool.(As illustrated in the succeeding figure)