Guidelines for Using or Disabling the Wi-Fi Functionality of Goldshell Miners

Currently, only the BOX model miner has Wi-Fi functionality.

Use the Wi-Fi functionality:

Method 1: Connect to the Wi-Fi with a network cable.

1. Visit find.goldshell.com, click the gear icon on the right side, then enter the miner dashboard.

2. Click the [System] tab, find the Wi-Fi settings, then click the WLAN button, find your local Wi-Fi, and input the correct password.

3. When the miner successfully connects to the WIFI, a link icon will appear. This icon means new IP address has assigned to the miner. To start mining, first click on the link icon which will take you to the new miner dashboard. Once you have accessed the dashboard, you can disconnect the network cable, add the pool, and begin mining.

Method 2: Connect to Wi-Fi without network cable. 

1. When you turn on the miner without network cable, the miner itself is a hotspot without password. Your cellphone or computer can connect to it. 

2. While your cellphone or computer successfully connects to miner's free-access Wi-Fi, open your browser of your cellphone or computer, reach out to the settled IP address 192.168.77.1 (Just type 192.168.77.1 on your browser), then you can enter the miner dashboard successfully. 

3. When you reach the miner dashboard through the settled IP address, click the [System] tab, find the Wi-Fi settings, then click the WLAN button, find your local Wi-Fi, and input the correct password, then connect.

4. When the miner successfully connects to the WIFI, its hotspot will disappear. Ensure your cellphone or computer and the miner are under the same network, press the miner's IP button then visit find.goldshell.com or use Yotta BC software to reach the new miner dashboard, add the pool and start mining.

Note: Please be extra cautious when entering the WIFI password. In case you accidentally input an incorrect password, you will need to reset the miner and repeat all the necessary procedures.

Disable the Wi-Fi functionality

If you want to turn off the Wi-Fi, please follow the above method 1 or method 2 to reach the new miner dashboard, click [System] tab, scroll down to Wi-Fi settings. You should now be able to click the WLAN slider to turn off the Wi-Fi.