Scenario 1: Upgrade progress bar completes, but the firmware version does not change.
Solution: Refresh the page; reboot the miner, and try upgrading again.
Scenario 2: Miner loses network connection, power, or is rebooted during the upgrade process.
Solution: A manual SD card recovery (TF card flash) is required. Please contact after-sales support for the flashing tutorial and files.
Scenario 3: Upgrade progress disappears during the process, and the firmware version remains unchanged.
Solution: Reset the miner and try upgrading again. Make sure the network connection is stable during the process.
Comments
0 comments
Article is closed for comments.