Miner operation related issues
- Why can't my Goldshell BYTE connect to my home WIFI?
- Miner not respond after being powered on.
- The miner is making a lot of noise/The miner is louder than expected/The miner is too noisy.
- WAN is not connected
- Miner is overheat.
- The new miner cannot obtain an IP address
- PSU Power Exceeds Requirement, But Only One Miner Works
- Red light blinks slowly/IP cannot be found/cannot enter the miner dashboard
- Firmware Upgrade Failure
- Mining pool is not ready yet/Failed to connect to the mining pool/Unable to connect to mining pool
- HW error is higher than 5%
- Reject rate is higher than 5%
- After an upgrade, if the miner doesn't work normally, what should I do?
- Interpretation of indicator lights